Osram Sylvania Mercury HBO103W/2 100 Watt Short Arc Lamp Long Life

OSRAM Display/Optic division is located in Danvers, Mass. Under the OSRAM brand name, the division produces innovative products to fulfill the needs of very diverse markets including entertainment, cinema film projection, information display, medical/scientific, semiconductor fabrication and airfield/aircraft. Over 500 different Display/Optic halogen and discharge lamp types are produced in the United States, Mexico, Germany and Japan.

OSRAM HBO® mercury short arc lamps are widely used in the medical and scientific fields for fluorescent microscopy and industrial UV-curing. In an OSRAM HBO lamp, a luminous arc is generated in a high pressure atmosphere of mercury vapor. Because the arc is only a few millimeters in length, HBO lamps are an almost perfect point source of light. These lamps offer high radiant power in both the UV and visible range, high optical quality and long life. Reflectorized lamps have been specifically designed to provide exceptional efficiency in light guide applications.

Features and Benefits:
- Enhanced electrode design for precise positioning and high arc stability
- Improved manufacturing process enables extended life (300 hours)
- Designed for use in all 100W fluorescent microscope systems
- HBO lamps are a perfect point source of light providing radiant power in both the UV and visible range.
- 30% increase in luminous flux in the 450-500 nanometer wavelength range.
- Optimized arc stability.
- Extended service life.

Osram Sylvania HBO103W/2 Specifications:
Mfg. Ordering Code: 69182
Wattage: 100 Watts
Initial Voltage Range: 20-25 Volts
Base: SFa7.5-2 Specialty Base
Ignition Voltage: 850 Volts
Length: 90mm (Overall Length)
Diameter: 10mm
Arc Length: 0.60mm
Average Life Hours: 300 Hours

Primary Applications: UV light curing, Fluorescence microscopy, Photo-polymerization

Other Known Codes: Microscope, Scientific, Medical, Dental, Mercury Short Arc, Microscope Illuminator, Leitz LH100Z, Leitz LH102Z (500-138), Olympus BHRFL, Olympus BH2RFL, Olympus IMT2RFL (8-B192), Zeiss 3800-18-4060, Cross to Ushio USH102DH, 78589, 69217, Osram HBO 100/2 (69217) Lamp Bulb Replacement HBO 100W/2 100 watt (100w) 20 volt (20v), SFa7, 5-2 / SFa9-2 s90, BC2389, Ushio USH102D, Olympus 8-B192, AO/Reichert 649

PURCHASING A MICROSCOPE LIGHT BULB: If you have trouble finding your bulb, try searching the web with the model number of the scope or any other information you know about the light bulb. There are many light bulb distributors globally but it is a good idea to buy a microscope bulb either from the scope manufacturer, a microscope dealer, or a specialty bulb distributor. These bulbs (sometimes referred to as lamps) are not household bulbs and if not sourced correctly can result in lost time and lost money. We have seen such things as filament spacing, arc positioning, base seating, and poor ceramic potting as issues. Another issue we hear is pricing discrepancies. Once again, buy from a reputable source - when there is an issue with the performance of the microscope or light bulb the retailer or web site will not know how to correct the problem.

MICROSCOPE LIGHT BULB REMOVAL: Locate the microscope manual. It is always a good idea to follow the steps within the manual. Some microscope manuals have detailed graphics that show where the light bulb is located and how to replace it. Make sure the microscope has been off for at least 30 minutes. Some of these light bulbs burn extremely hot and can cause severe burns. When removing the light bulb, be very careful when taking it out of the socket. Some sockets are made out of ceramic that can be fragile. You may require a screwdriver to remove the illuminator in order to get to the light bulb. Compare the removed light bulb with the new bulb. There are so many different types of bulbs and manufacturers of bulbs that even the slightest change may affect the optics of the microscope. It is also a good idea to keep the light bulb for future reference.

MICROSCOPE LIGHT BULB INSTALLATION: Never touch the glass of the light bulb especially if you are replacing a mercury short arc, xenon, or halogen bulb. The oil from your skin increases the surface temperature of the bulb causing the light bulb to a have shorter life. Use a cloth or request an optical cloth for bulb replacement. We can send you one if requested free of charge when buying a bulb from us. Reverse the procedures when you removed the burnt out light bulb and reattached the illuminator. Some higher end microscopes require filament alignment. There should be adjustment screws that change the X and Y axis for proper performance.

MICROSCOPE LIGHT BULB DISPOSAL: Most bulbs can simply be thrown away but some microscope bulbs require proper disposal. If you are replacing a mercury, xenon, or fluorescent bulb, contact the distributor to ensure proper disposal methods.

©Copyright 2008 SOS