|
Welch Allyn 04700/FR .70 Watt Scientific Medical Halogen Frosted Lamp
|
|
Item Number: 04700/FR
Manufacturer: Ushio
Manufacturer Part No: 8000029
|
Welch Allyn 04700/FR (Frosted) Halogen Medical Lamp
Welch Allyn 04700/FR Specifications:
- Voltage: 2.5 Volts
- Wattage: .07 Watts
- Color Temperature: 2,950 Kelvin
- Shape: Special G5
- Base Type: Special Base
- Length: 14.33mm
- Average Life Hours: 20 Hours
SOS Notes Concerning Halogen and Incandescent Light Bulbs:
-
Halogen lamps operate at extremely high temperatures that can cause serious physical injuries and property damage.
-
Only
use Halogen lamps in Halogen-approved fixtures. Fixtures should fully
contain any parts of the Halogen lamp upon the event of a lamp burst.
-
Do not use Halogen lamps in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
-
Lamps
are very fragile. Do not drop, crush, bend or shake them. Vibration or
impact will cause filament breakage and short lamp life.
-
Do
not touch the Halogen bulb surface or inside reflectors with your bare
hands. Oils from skin can lead to breakage or shorten the life of the
lamp. Use clean gloves or lint-free cloth for installation and removal.
-
Clean
any dirt, oil, or lint away from the lamp with alcohol and a lint-free
cloth or tissue. Any foreign particles or materials on the bulb surface
can cause hot spots on the bulb and result in lamp failure.
-
Never touch the lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
-
Do not look directly at the operating lamp for any period of time; this may cause serious eye injury.
-
Always turn off the electrical power before inserting, removing, or cleaning the lamp.
-
Affix
the lamp securely in the socket. Improper installations will cause
electrical arcing, overheating and short life to lamp and socket.
Replace lamp holders and sockets when necessary.
-
Keep the temperature of the Halogen lamp seal below 350 Degrees C.
-
Keep the temperature of the Halogen bulb wall above 250 Degrees C.
-
Keep the temperature of the Halogen lamp bulb wall below 800 Degrees C.
-
Make
sure lamps of specified wattage and voltage are only used in
appropriately rated fixtures. Unspecified use will lead to short lamp
life, breakage and overheating of fixture.
-
Lamps
should not be operated beyond the total rated voltage. Avoid the use of
dimmers that may drive your lamp over its rated voltage.
-
Operate the lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
-
Use an external fuse when required.
-
Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.
|
Product Reviews
| (1 Rating, 0 Reviews) |
Average Rating:
|
|
|