|
Ushio MR-8 12V-20W/NSP10/FG 20W 12V 10 Degree Beam Halogen Lamp
|
|
Item Number: MR-8 12V-20W/NSP10/FG
Manufacturer: Ushio
Manufacturer Part No: 1003116
|
Ushio MR-8 12V-20W/NSP10/FG Halogen Narrow Spot Replacement Lamp
In addition to the technologically superior MR-16 lamps manufactured by USHIO, smaller halogen mirrored reflectors have also been developed in both MR-11 and MR-8 sizes. These reduced-size, low-voltage MR lamps are ideal for landscape lighting and some of the newer low-profile track lighting systems. At only one inch in diameter, USHIO's MR-8 lamp allows for even smaller fixture designs than MR-11 and MR-16 Lamps. Available in 20W and 35W in narrow and wide beam spreads.
Features and Benefits of the Ushio MR-8 12V-20W/NSP10/FG
- 1 Inch in Diameter
- Standard Bi Pin GZ4 Base
- 3050K Color Temperature
- 2000 Hours Average Life
- Integrated Cover Glass
- Precisely Focused Light Cone
- Dimmable
- Cool Beam Dichroic Reflector
- Low Voltage - 12 Volts
- Universal Burn Position
MR-8 12V-20W/NSP10/FG Applications:
Decorative Lighting
Display Lighting
Accent Lighting
Low-Voltage Lighting
Landscape Lighting
Ushio MR-8 12V-20W/NSP10/FG Specifications:
Wattage: 20 Watts
Voltage: 12 Volts
Base Type: GZ4 (Bi-Pin)
Bulb Type: MR8 Halogen Reflector
Beam Angle: 10 Degrees (Narrow Spot)
Front Glass: Yes
Length: 34.6mm
Average Life Hours: 2,000 Hours
Notes Concerning Halogen and Incandescent Light Bulb:
- Halogen lamps operate at extremely high temperatures that can cause serious physical injuries and property damage.
- Only use Halogen lamps in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
- Do not use Halogen lamps in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
- Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
- Do not touch the Halogen bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
- Clean any dirt, oil, or lint away from the lamp with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the bulb surface can cause hot spots on the bulb and result in lamp failure.
- Never touch the lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
- Do not look directly at the operating lamp for any period of time; this may cause serious eye injury.
- Always turn off the electrical power before inserting, removing, or cleaning the lamp.
- Affix the lamp securely in the socket. Improper installations will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
- Keep the temperature of the Halogen lamp seal below 350° C.
- Keep the temperature of the Halogen bulb wall above 250° C.
- Keep the temperature of the Halogen lamp bulb wall below 800° C.
- Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
- Lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
- Operate the lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
- Use an external fuse when required.
- Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.
|
Product Reviews
|
|