|
Ushio EVA 100W 12V Low Voltage Halogen Lamp
|
|
Item Number: EVA
Manufacturer: Ushio
Manufacturer Part No: 1000381
|
Ushio EVA Halogen Bi-Pin Lamp for Medical and Dental Applications
USHIO lighting products include a diverse array of gas discharge and halogen/incandescent lamps designed to meet the precise needs for many industrial, scientific and medical applications. USHIO halogen, mercury, xenon, ceramic xenon ,metal-halide, and EmArc® brand lamps are built to exacting specifications to ensure optimum output and performance in equipment designed for critical processes and procedures.
Ushio EVA Specifications:
Wattage: 100 Watt
Voltage: 12 Volt
Base Type: GY6.35 Bi-Pin
Length: 49.3mm
Average Life: 2,000 Hours
Other Known Codes: Osram 64623, Osram HLX64623, Nikon 84125, Olympus 8C406, Zeiss 380079-9540-000
Notes Concerning Halogen and Incandescent Light Bulb:
- Halogen lamps operate at extremely high temperatures that can cause serious physical injuries and property damage.
- Only use Halogen lamps in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
- Do not use Halogen lamps in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
- Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
- Do not touch the Halogen bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
- Clean any dirt, oil, or lint away from the lamp with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the bulb surface can cause hot spots on the bulb and result in lamp failure.
- Never touch the lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
- Do not look directly at the operating lamp for any period of time; this may cause serious eye injury.
- Always turn off the electrical power before inserting, removing, or cleaning the lamp.
- Affix the lamp securely in the socket. Improper installations will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
- Keep the temperature of the Halogen lamp seal below 350° C.
- Keep the temperature of the Halogen bulb wall above 250° C.
- Keep the temperature of the Halogen lamp bulb wall below 800° C.
- Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
- Lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
- Operate the lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
- Use an external fuse when required.
- Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.
|
Product Reviews
| (1 Rating, 0 Reviews) |
Average Rating:
|
|
|