USHIO was established in 1964, when the use of light was just beginning to gain industrial significance, with the aim of developing illumination and energy related applications for light. Through out its history, USHIO has focused on developing new lighting technologies in cooperation with our customers. Film & Cinema Lighting, Video Lighting, Concert & Stage Lighting, Theatrical Lighting, Club and Disco Lighting, and Special Effects Lighting.
Base Type: GU5.3 Bulb Shape: MR16 Reflector Type: SPECULAR Color Temp (K): 3000 Average Life Hours: 3500
SOS Notes Concerning Halogen and Incandescent Light Bulbs:
Halogen lamps operate at extremely high temperatures that can cause serious physical injuries and property damage.
Only use Halogen lamps in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
Do not use Halogen lamps in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
Do not touch the Halogen bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
Clean any dirt, oil, or lint away from the lamp with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the bulb surface can cause hot spots on the bulb and result in lamp failure.
Never touch the lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
Do not look directly at the operating lamp for any period of time; this may cause serious eye injury.
Always turn off the electrical power before inserting, removing, or cleaning the lamp.
Affix the lamp securely in the socket. Improper installations will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
Keep the temperature of the Halogen lamp seal below 350 Degrees C.
Keep the temperature of the Halogen bulb wall above 250 Degrees C.
Keep the temperature of the Halogen lamp bulb wall below 800 Degrees C.
Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
Lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
Operate the lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
Use an external fuse when required.
Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.
Ushio JCR12V-75W/FO Specifications:
Mfg. Ordering Code: 1003239
Wattage: 75 Watts
Voltage: 12 Volts
Beam Angle: 30 Degree
Base Type: GU5.3
Bulb Shape: MR16
Reflector Type: SPECULAR
Color Temp (K): 3000
Average Life Hours: 3500
There are 0 review(s) for Ushio JCR12V-75W/FO 75W MR16 Narrow Flood Halogen Light Bulb