General Electric ELC Halogen MR16 Lamp (JCR24V-250W)
From
the microscope to the operating room, from dental equipment to
laboratory instruments, from fiber optics to measuring and inspection
equipment, GE has the right lamps for all you applications. All of the
broad range of GE lamps have one thing in common, Each is engineered to
GEs High standards of Quality and precision for excellent value.
GE ELC Lamp Specifications:
ANSI Code: ELC
Wattage: 250 Watts
Voltage: 24 Volts
Bulb Type: Halogen MR16 Reflector
Base Type: GX5.3
Reflector Diameter: 50.3mm (MR16)
Beam Spread: Focused Beam Spread
Color Temperature: 3,400 Kelvin
Typical Lamp Working Distance:
1 1/4 (Inches)
Average Life Hours: 50 Hours
SOS Notes About ELC Bulb Removal and Replacement:
When replacing a ELC lamp always wait for the lamp to cool down within the fixture before removing it. Halogen lamps get extremely hot and can cause severe burning if touched while in operation or immediately afterward. Take the lamp out by using a cloth that provides some insulation from the heat. When removing an ELC from the fixture get as close as possible to the base before removing from the socket. Take extra care when you take the new bulb out of the packaging and do not touch the glass bulb itself. Touching the 'reflector" will not cause any performance issues. It is a good idea to use gloves or a cloth to insert the lamp into the ELC socket. The oil from your skin makes the glass of the bulb itself super heat and causes early ELC lamp failure.