|
Osram Sylvania EFP 64627 HLX 100W 12V MR16 Lamp
|
|
Item Number: 64627
Manufacturer: Osram / Sylvania
Manufacturer Part No: 54189
|
Osram Sylvania EFP 64627 HLX 100W 12V Lamp
OSRAM Display/Optic division is located in Danvers, Mass. Under the OSRAM brand name, the division produces innovative products to fulfill the needs of very diverse markets including entertainment, cinema film projection, information display, medical/scientific, semiconductor fabrication and airfield/aircraft . Over 500 different Display/Optic halogen and discharge lamp types are produced in the United States, Mexico, Germany and Japan.
The Osram 64627 (EFP) 100 Watt 12 Volt MR16 Halogen Lamp is primarily used in projectors, medical lighting, microscopes lighting and ophthalmic uses.
Osram 64627 Specifications:
ANSI Code: EFP
Reference Code: JCR12V-100W
Watts: 100 Watt
Volts: 12 Volt
Base: GZ6.35 Bi-Pin Base
Type: Halogen
Color Temperature: 3,350 Kelvin
Shape: MR16 (50.7mm diameter)
Avg. Life Hours: 50 Hours
NOTES FOR CHANGING A 64627 HALOGEN LIGHT BULB
Being in the Specialty Lighting Business for over 25 years we have seen all kinds of specialty bulbs that need replacement in optical systems. From multi-million dollar photolithography machines to simple student microscopes there are some basic guidelines that can be followed to ensure safety and extend the life of the lamp.
64627 LIGHT BULB REMOVAL:
Locate the manual of the equipment. It is always a good idea to follow the steps within the manual. Some manuals have detailed graphics that show where the light bulb is located and how to replace it. Make sure the equipment has been off for at least 30 minutes. Some of these light bulbs burn extremely hot and can cause severe burns. When removing the light bulb, be very careful when taking it out of the socket. Some sockets are made out of ceramic and can be fragile. You may require a screwdriver to remove the illuminator in order to get to the light bulb. Compare the removed light bulb with the new bulb. There are so many different types of bulbs and manufacturers of bulbs that even the slightest change may affect the equipment. It is also a good idea to keep the burtn out light bulb for future reference.
64627 LIGHT BULB INSTALLATION:
Never touch the glass of the light bulb especially if you are replacing a mercury short arc, xenon, or halogen bulb. The oil from your skin increases the surface temperature of the bulb causing the light bulb to a have shorter life. Reverse the procedures when you removed the burnt out light bulb. Some higher end equipment require filament alignment. There should be adjustment screws that change the X and Y axis for proper performance.
64627 LIGHT BULB DISPOSAL:
Most bulbs can simply be thrown away but some microscope bulbs require proper disposal. If you are replacing a mercury, xenon, or fluorescent bulb, contact the distributor to ensure proper disposal methods. EFP light bulbs do not need special disposal.
©Copyright 2011 SOSLightBulbs.com
|
Product Reviews
|
|