|
Osram EKE 150 Watt Halogen MR-16 Light Bulb
|
|
Item Number: EKE
Manufacturer: Osram / Sylvania
Manufacturer Part No: EKE
|
Osram EKE Halogen Light Bulb with MR16 Reflector
Lamps and lighting systems from OSRAM provide the basis for a beautiful view of things, ensure safety and comfort, allowing for the efficient use of resources. For more than 100 years, OSRAM has been "passionate about intelligent light". As a globally operating company, we also explicitly encourage socially and environmentally responsible policies around the world - as well as sponsoring art and culture at home and abroad.
Osram EKE Lamp Technical Specifications:
Reference Code: JCR21V-150W
Wattage: 150 Watt
Voltage: 21 Volt
Base Type: GX5.3
Gas Fill: Halogen
Color Temperature: 3,350 Kelvin
Average Life Hours: 50 Hours
Lamp Shape: MR16 (50.7mm diameter)
NOTES FOR CHANGING AN OSRAM EKE HALOGEN LIGHT BULB
Being in the Specialty Lighting Business for over 25 years we have seen all kinds of specialty bulbs that need replacement in optical systems. From multimillion dollar photo lithography machines to simple student microscopes there are some basic guidelines that can be followed to ensure safety and extend the life of the lamp.
OSRAM EKE LIGHT BULB REMOVAL:
Locate the manual of the equipment. It is always a good idea to follow the steps within the manual. Some manuals have detailed graphics that show where the light bulb is located and how to replace it. Make sure the equipment has been off for at least 30 minutes. Some of these light bulbs burn extremely hot and can cause severe burns. When removing the light bulb, be very careful when taking it out of the socket. Some sockets are made out of ceramic and can be fragile. You may require a screwdriver to remove the illuminator in order to get to the light bulb. Compare the removed light bulb with the new bulb. There are so many different types of bulbs and manufacturers of bulbs that even the slightest change may affect the equipment. It is also a good idea to keep the burtn out light bulb for future reference.
OSRAM EKE LIGHT BULB INSTALLATION:
Never touch the glass of the light bulb especially if you are replacing a mercury short arc, xenon, or halogen bulb. The oil from your skin increases the surface temperature of the bulb causing the light bulb to a have shorter life. Reverse the procedures when you removed the burnt out light bulb. Some higher end equipment require filament alignment. There should be adjustment screws that change the X and Y axis for proper performance.
OSRAM EKE LIGHT BULB DISPOSAL:
Most bulbs can simply be thrown away but some microscope bulbs require proper disposal. If you are replacing a mercury, xenon, or fluorescent bulb, contact the distributor to ensure proper disposal methods. EKE light bulbs do not need special disposal.
©Copyright 2008 SOSLightBulbs.com
|
|
|
|
List Price: $15.50
Your Price: $8.29
|
|
|
GX5.3 Bi-Pin Base
|
|
|
|
|
|
List Price: $15.50
Your Price: $10.50
|
|
|
GX5.3 Bi-Pin Base
|
|
|
|
|
|
List Price: $15.50
Your Price: $10.50
|
|
|
GX5.3 Bi-Pin Base
|
|
|
|
|
|
|
Product Reviews
|
|